Description of intelligent mower

1) Fully-automatic grass mowing by microcomputer processor; 

2) Drive insects away by ultrasonic radar;

3) Intelligent moving function;

    Intelligently adjust moving speed according to lawn density, namely reduce moving speed in  the areas with dense grass while increasing moving speed in the areas with sparse grass and spiraling outwards in the areas with very dense grass. In such a way, the service lifetime of grass mowing electric motor and batteries can be ensured, furthermore, grass mowing efficiency can be increased and the service lifetime of machine electric circuits can be greatly extended. 

4) Intelligent mower can automatically change direction when meeting any obstacles to accomplish barrier-avoiding capabilities. 

5) After being damped by rain, the mower stops operation, its procedure of find charging base is started up immediately to find charging base and stop inside it.

6) When batteries run out, the mower will stop operation, its procedure of find charging base is started up immediately to find charging base and stop inside it for charging. After being charged, the machine can continue operation according to preset procedure.

7) Humanistic adjustment for grass mowing height makes it possible for users to adjust height without the need of touching the blade or machine base plate. Adjustment methods and graduation are clear at a glance.  

8) Blade safety control  ;

    When people or animal comes closer, the machine can automatically stop the blade, reliably realize the function of stopping machine operation when the machine is lifted from the ground in a oblique and horizontal way, and improve the safety of machine operation.  

9) Remote control function  ;

    Realize directional moving, grass mowing, barrier-avoiding, startup/closedown of machine etc by means of the instruction of remote controller; 

10Preventing be stolen function

     The mower has Dual-boot function. It could not be started without the remote contral. The buzzer in the machine will alarm suppose it was forced taken away by someone when it was working or charging.

11) Charging base contains electronic fence  ;

     Electronic fence is a cable line loaded with modulating signal. Circle the grassland with this cable line in advance. So, the machine will not leave this assigned range when mowing grass.The cable line contains a wireless transmitting waveband.Once fence line has no power, wireless transmitting will be stopped and mower stops operation to prevent the machine from leaving the assigned range when electronic fence has no power. And make electronic fence integrate with charging base.

sides of the blade are sharp.

Mowers function parameters

Cutting speed: 21meters/minute

Cutting height: 2.5cm6.5cm

Largest coverage: 3500 (the largest scope which could be contraled by the procedure)

Advised cutting scope: 500

Average coverage: 127/hour (Example: cutting 254mm green land cost two hours)

Machine size: 650mm*550mm*280mm

Weight: 8.3kgs (not include the weight of the battery)

Cutting power: 100W

Maximum slop:30 degrees

power supply supports 110-240V electric outlets

batteries: Li-ion battery or Lead-acid battery.